Configuring D-Link DI-701 Residental Gateway for LapLink - Search Again

SUMMARY

I have a D-Link DI-701 gateway. How can I configure it to allow LapLink to connect over the Internet?

CAUSE

See Technical Document 38, Using LapLink in a Secure Environment for more information.

SOLUTION

1. From the Windows Start menu, go to Programs and click Link DI-701 to start the setup program.

Note: The DI-701 can also be configured using a terminal emulation program, such as Windows HyperTerminal, or through Telnet. Check the installation guide for details.

2. Highlight the IP address for the DI-701 and click Configure. The default is 192.168.0.1
.

3. Click the Virtual Server tab.


4. Add the IP address of your LapLink computer for port 1547.


5. Click Add.


6. Click Save to reboot the gateway.

1. Determine the external IP address of the D-Link router.


2. In LapLink, go to Connect over...Network.


3. Click the TCP/IP tab.


4. In the Name or Address field, enter external IP address.
   Note: If using the external IP address fails, try external IP address:1547
   

Related Articles

Configuring a 3Com Home Connect Wireless Gateway for LapLink    Configuring a Linksys Broadband Etherfast Cable/DSL Router for use with LapLink    Configuring a NetGear Cable/DSL Router for use with LapLink    Configuring a SMC Barricade Broadband Router for LapLink Connections    Configuring AtGuard Personal Firewall for LapLink Connections    Configuring ConSeal PC Personal Firewall for LapLink Connections

Last updated: Monday, July 09, 2001

Article #336

Legacy Article #