Configuring D-Link DI-701 Residental Gateway for PCsync Connections - Search Again

 

SUMMARY

I have a D-Link DI-701 gateway. How can I configure it to allow PCsync to connect over the Internet?

 

CAUSE

See Technical Document 303, Using PCsync in a Secure Environment for more information.

 

SOLUTION

  1. From the Windows Start menu, go to Programs and click Link DI-701 to start the setup program.

    2. Note: The DI-701 can also be configured using a terminal emulation program, such as Windows HyperTerminal, or through Telnet. Check the installation guide for details.
  2. Highlight the IP address for the DI-701 and click Configure. The default is 192.168.0.1
    3. .
  3. Click the Virtual Server tab.

  4. Add the IP address of your PCsync computer for ports 8080, 8443, and 8444.

  5. Click Add after each entry.

  6. Click Save to reboot the gateway.


See Technical Document 305, How to Surf Up to a Computer behind a Router/Firewall for information on connecting.

If you need additional information or support, please contact D-Link Technical Support at http://support.dlink.com/.

 

 Related Articles

  Configuring a 'CheckPoint Firewall-1' for use with PCsync
  Configuring a 3Com Home Connect Wireless Gateway for PCsync Connections
  Configuring a Cisco PIX Firewall for use with PCsync Connections
  Configuring a Cisco Router using Access Lists for use with PCsync
  Configuring a NetGear Cable/DSL Router for use with PCsync
  Configuring an Axent Raptor Firewall for use with PCsync

 

Last updated: Monday, July 09, 2001

Article #323

Legacy Article #